Name: Converter S215 -5 +5 Volt
Brand: Gicam

S215 Board for load cell

Click to enlarge image

Board power supply	24Vcc +-15%
Cell power supply	4 V dc per cell (1 cell of 350 Ω or 700 Ω) protected against short circuit
Power assumption	0.6W with 350 Ohm cell
Output	0 to +5V (-5/+5V) with load ≥ 2 kW
Input sensitivity	Standard 2 mV/V, 1mV/V R3: 50 Ω
Dimensions	45mm x 20.5mm x 10mm
Connections	Welded wires
Cell connection	With 4 wires
Storage temperature	- 10 °C / + 50 °C (14 °F / 122 °F)
Operating temperature	- 20 °C / + 60 °C (- 4 °F / 140 °F)
Linearity	0.02%
Thermal stability	30 ppm/°C
Zero adjustment	± 10% full scale through multi-turn trimmer
Gain adjustment	±10% of full scale using multi-turn trimmer
Analog Filter	100 Hz

General precautions to be followed in the installation and assembly of load cells:

Follow the direction of application of force on the load cell
Do not exceed the limits of the temperature as indicated in the data sheet
Do not remove labels from the load cell
Adequately protect the cables with sleeves or channels
Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
Do not carry out any welding on the mechanical structure after mounting the load cell
Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
Protect load cell from any dust accumulation with any appropriate means