Cookie Consent by Free Privacy Policy website Skip to content

Indicator RQ Profinet

Download PDF datasheet

Gicam weight indicators are weight indicator devices connected to load cells. We have multifunction displayers for weighing and dosing, for bridge weighing, with load limiter. Portable displayers are available in comfortable briefcases. We have panel mounting, portable, DIN and OMEGA bar mounts, analog indicators and touch screens indicators. IP65 products are available with dust protection. Gicam indicators support industrial communication protocols like PROFIBUS, PROFINET, MODBUS and more.

Digital AMPLIFIER with PROFINET interface

Click on the image to enlarge

Indicator RQ Profinet Indicator RQ Profinet Drawing

Technical specifications

Power supply24 V direct current ± 10% protected against polarity inversion, protection with resettable fuse
Max power consumption2 W
IsolationClass II
Installation CategoryCategory II
Operating temperature-10 / +50 °C (14 / 122 °F) Humidity Maximum 85% non-condensing
Storage temperature-10 / +60°C (-4 / +140°F)
DisplayNumeric with 5 red led digits 7 segments each (h 7 mm)
Led2 LED with 3 mm
Keyboard3 keys (behind red front cover)
Overall dimensions110 mm x 120 mm x 35 mm / 4.33 x 4.72 x 1.38 in (l x h x p)
MountingSupport for DIN rail or OMEGA bar
Case materialBlend ABS/PC self-extinguishing
ConnectionsRemovable screw terminals. Pitch screws terminal blocks 5.08 mm
Load cell input featuresMaximum 4 cells with 350 Ω in parallel (or 8 cells with 700 Ω)
Power supply load cells4 V
Linearity< 0.01% of full scale
Temperature deviation< 0.001% of full scale/C°
Internal resolution24 bit
Measuring rangeFrom -2.6 mV/V to +2.6 mV/V
Output rateFrom 4 Hz to 123 Hz
Number of weight decimalsFrom 0 to 3 decimals
Zero / FS CalibrationExecutable through buttons
Cell cable interruption checkAlways present
Serial portRs232 half duplex
Max. cable length15 m (Rs232c) 49 ft (RS232c)
Baud rate1200, 2400, 4800, 9600, 19200, 38400, 115200
Field busPROFINET
Conforms to standardsCompliance to EMC norms: EN61000-6-2, EN61000-6-3, Compliance electric safety: EN 61010-1

For complete and up-to-date technical specifications please refer to the datasheet you can download here

Download PDF datasheet

Load cell mounting

General guidelines for installing and mounting load cells:

  • Respect the direction in which forces are applied to the load cells
  • Do not exceed the temperature limits shown on the rating plate
  • Do not remove the labels from the cells
  • Protect cables properly with sheaths or cable ducts
  • Connect each cell to earth with a suitable cable, bridging the plates of the mounting accessories if necessary
  • Do not weld on the mechanical structure once the cells are in place
  • Avoid or minimise mechanical constraints between the fixed structure and the weighed structure, to prevent weighing errors and zero return problems
  • When vibrations or dynamic loads are present, protect the cells with anti-vibration mounts
  • Protect the cells from dust build-up with suitable covers