Cookie Consent by Free Privacy Policy website

Transmitter WAT 01


Download PDF

Weight Transmitters with direct connection of one ore more load cells and a wide range of outputs for an easy integration in every industrial and automation system. Comfortable and immediate installation on DIN bar and/or OMEGA bar.

Transmitter

Download usage manual


Zoom Click to enlarge image

Transmitter WAT 01

Technical Specifications

Power supply24 V dc ± 15 %
Max power consumption6 W
IsolationClass III
Operating temperature-10 / +40°C (14 °F / 104°F) Humidity maximum 85% non-condensing
Storage temperature-20 / +60°C (-4 / +140°F)
Overall dimensions130 x 90 x 72 mm / 5.12 x 3.54 x 2.83 in (l x h x p)
MountingSupport DIN or OMEGA rail
Case materialPolyamide 6.6 UL 94V-0, self-extinguishing
ConnectionsRemovable screw terminals. Pitch screws terminal blocks 5.08 mm
Power supply load cells10 V dc / 120 mA (maximum 4 cells with 350 Ω in parallel) short circuit protection
Linearity0,02 % of full scale
Temperature deviation0,005 % of full scale/°C
Measuring range-0.5 / +3 mV/V
Zero / FS CalibrationAdjustment zero and f. s. coarse by of micro switches 16 combinations, fine with 18-turn resistive trimmer
Analog integrator filterAdjustable w. single-turn trimmer
Analog output in tension0 – 10 V / ± 5 V
 Impedance≥ 10 kΩ
Analog output under current0 - 20 mA / 4 - 20 mA
 Impedance≤ 300 Ω
Conforms to standardsCompliance to EMC norms: EN61000-6-2, EN61000-6-3, Compliance electric safety: EN 61010-1
For the complete and latest technical specifications, please refer to the technical data sheet which can be downloaded here:
Download PDF

Connections

TypeTerminal block MA 20P pitch 5.08
LengthND
1Load cell 1, Exc. -
2Load cell 1, Exc. +
3Load cell 1, signal -
4Load cell 1, signal +
5Shield
6Load cell 2, Exc. -
7Load Cell 2, Exc. +
8Load Cell 2, signal -
9Load cell 2, signal +
10Shield
11Load cell 3, Exc. -
12Load cell 3, Exc. +
13Load cell 3, signal -
14Load cell 3, signal +
15Shield
16Load cell 4, Exc. -
17Load cell 4, Exc. +
18Load cell 4, signal -
19Load cell 4, signal +
20Shield
TypeTerminal block MB 6P pitch 5.08
LengthND
21Current analog out 0-20mA/4-20mA
22Voltage analog out 0-10Vcc
23Analog out (voltage / current)
24- 24 vcc ± 15%
25+ 24 vcc ± 15%
26Ground
Connections  Transmitter WAT 01

MOUNTING OF THE LOAD CELL

General precautions to be followed in the installation and assembly of load cells:

  • Follow the direction of application of force on the load cell
  • Do not exceed the limits of the temperature as indicated in the data sheet
  • Do not remove labels from the load cell
  • Adequately protect the cables with sleeves or channels
  • Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
  • Do not carry out any welding on the mechanical structure after mounting the load cell
  • Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
  • In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
  • Protect load cell from any dust accumulation with any appropriate means