Repeater RIP H20

Download PDF

Receiving data from RS232, RS485, RF 868 MHz.

Numerical Display to 6 characters/figures, height 20 mm.

Container self-extinguishing Noryl (UL 94 V1).

Connects to all instruments of our production.

Configuration and customization protocol with PC software supplied.

Download installation manual

Download usage manual

Zoom Click to enlarge image

Repeater RIP H20

Technical Specifications

Power supply230 V ac, 50 / 60 Hz option 115 V ac, 50 / 60Hz or 12 / 24 V dc
IsolationClass II
Installation CategoryCategory II
Operating temperature-10 / +40C (14 F / 104F) Humidity maximum 85% non-condensing
Storage temperature-20 / +50C (-4 / +122F)
Display5-digit numeric red LED with 7 segments (h 20 mm)
Led8 5 mm indicator LEDs
Keyboard5 mechanic keys
Built-in depth135 mm / 5.31 in
Overall dimensions144 x 72 x120 mm / 5.67 x 2.83 x 4.72 in (l x h x p) (DIN43700)
MountingPanel mount (cutout 139 mm x 67 mm)
Case materialSelf-extinguishing Noryl (UL94 V1)
Protection levelIP 54
ConnectionsRemovable screw terminal blocks 5.08 pitch (power supply pitch7.5), serial ports on 9-pole SUB-D plug
Communication portsCOM1: Rs232c, COM2: Rs422/Rs485
 Max. cable length15m (Rs232c) and 1000m (Rs485)
 Serial protocolsASCII + programmable custom protocols
 Baud rateFrom 1200 to 115200 selectable
Optional interface RF 433 MHzCoupled operation with transmitter module to be combined with the transmitter weighing instrument
Num. RF ChannelsUp to 7 channels selectable on the 868 MHz band for installation of multiple systems in the same area
Average radius of coverage100 meters in free air
Conforms to standardsEN61000-6-2, EN61000-6-3, EN61010-1
For the complete and latest technical specifications, please refer to the technical data sheet which can be downloaded here:
Download PDF


TypeTerminal block 2P (pitch 7.5)
1230V~ Line
2230V~ Neutral
Type9 pin Sub-D
2RS232 Rx
3RS232 Tx
4RS422 TX+
6RS422 TX-
7RS422 RX-
8RS232 CTS
9RS422 RX+
Connections  Repeater RIP H20


General precautions to be followed in the installation and assembly of load cells:

  • Follow the direction of application of force on the load cell
  • Do not exceed the limits of the temperature as indicated in the data sheet
  • Do not remove labels from the load cell
  • Adequately protect the cables with sleeves or channels
  • Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
  • Do not carry out any welding on the mechanical structure after mounting the load cell
  • Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
  • In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
  • Protect load cell from any dust accumulation with any appropriate means