Receiving data from RS232, RS485, RF 868 MHz.
Numerical Display to 6 characters/figures, height 60 mm.
Container in stainless steel and watertight logons.
Connects to all instruments of our production.
Configuration and customization protocol with PC software supplied.
Click to enlarge image
| Power supply | 230 - Opz. 115 Vac 50/60 Hz | |
| Max power consumption | 15 VA | |
| Operating temperature | -10 / +40°C (14 °F / 104°F) Humidity maximum 85% non-condensing | |
| Storage temperature | -20 / +50°C (-4 / +122°F) | |
| Display | High efficiency 6-digit numerical LED and wide viewing angle, reading distance up to 50 feet | |
| Reading distance | Till at 15 m | |
| Visualized data | Weight acquired from cells or analogue input 0-10V/4-20 mA, alphanumeric indications/programming menu | |
| Functions remote control | Tare entry / cancellation, zero scale, serial transmission current weight, configuration and calibration | |
| Overall dimensions | 320 x 110 x 90mm / 12.6 x 4.3 x 3.5 in (l x h x p) | |
| Mounting | Wall-mounted with 4 external side holes Ø 6 mm with center distance 340 x 80 mm (l x h) | |
| Case material | Stainless steel protected against dust | |
| Protection level | IP 65 | |
| Connections | Waterproof circular connectors with conductor wiring with screw terminal | |
| Communication ports | Rs232c / Rs485 standard | |
| Max. cable length | 15m (Rs232c) and 1000m (Rs485) | |
| Serial protocols | ASCII + programmable custom protocols | |
| Baud rate | From 1200 to 115200 selectable | |
| Options | Ethernet protocol and Profibus protocol | |
| Optional interface RF 433 MHz | Coupled operation with transmitter module to be combined with the transmitter weighing instrument | |
| Num. RF Channels | Up to 7 channels selectable on the 868 MHz band for installation of multiple systems in the same area | |
| Average radius of coverage | 100 meters in free air | |
| Conforms to standards | EN61000-6-2, EN61000-6-3, EN61010-1 | |
| Type | 9P D-Sub J2 RIP Connector |
| Length | ND |
| 1 | RS485 - |
| 2 | RS232 Tx |
| 3 | RS232 Rx |
| 4 | NC |
| 5 | GND |
| 6 | NC |
| 7 | NC |
| 8 | NC |
| 9 | RS485 + |
General precautions to be followed in the installation and assembly of load cells:
