Weighing Systems CRL PRESS LOAD


Download PDF

The system consists of a weight indicator TOUCH SCREEN WIN TS that allows you to power and read load cell, column model COL1 compression load cell, with capacities up to 20000 kN.

This control system is ideal to be used in the most modern systems for applications such as sledge hammers, presses, test benches and automation in general, allowing to detect the peak value at a frequency of 2 kHz. The system can be modular with 1/2/3 load cells with dedicated capacities for the application.


Zoom Click to enlarge image

Weighing Systems CRL PRESS LOAD Weighing Systems CRL PRESS LOAD Schema Weighing Systems CRL PRESS LOAD Montaggio

Technical Specifications

Power supply220V
Operating temperature-10 / +50 C (14 / 122 F)
Storage temperature-20 / +60C (-4 / +140F)
DisplayLCD 5.2 "(visible area 118 x 58 mm) monochromatic high contrast
 Display brightnessWhite LEDs, adjustable intensity
 Touch screenResistive 4 wires, suitable for use with gloves, buzzer
Protection levelIP 65
Weight acquisition frequency2000 Hz
Load cells materialStainless steel
Load cells capacity50, 100, 200, 300 t
Briefcase overall dimensions400 x 300 x 200 mm / 15.7 x 11.8 x 7.9 in
Briefcase weight5 kg / 11 lbs
Connection cable5 / 10 m 6 x 0,30 (shield not connected to the load cell body)
For the complete and latest technical specifications, please refer to the technical data sheet which can be downloaded here:
Download PDF

MOUNTING OF THE LOAD CELL

General precautions to be followed in the installation and assembly of load cells:

  • Follow the direction of application of force on the load cell
  • Do not exceed the limits of the temperature as indicated in the data sheet
  • Do not remove labels from the load cell
  • Adequately protect the cables with sleeves or channels
  • Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
  • Do not carry out any welding on the mechanical structure after mounting the load cell
  • Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
  • In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
  • Protect load cell from any dust accumulation with any appropriate means