Shear beam load cell TS8

Shear beam load cells for weighing tanks, silos, hoppers, load control of cranes, winches, lifting systems, automation etc..

Shear beam load cell

Upon request with ATEX o IECEx certification.

Click on the image to enlarge

Technical specifications

Material	Steel
Nominal load	3000, 5000 kg
Limit load	150 % F.S.
Breaking load	300 % F.S.
Supply voltage	Vcc 15 Max
Output	3 mV/V
Output tollerance	0,1 % F.S.
Zero tollerance	1 % F.S.
Linearity	0,03 % F.S.
Hysteresis	0,03 % F.S.
Reapeatability	0,03 % F.S.
Input resistance	350-360 ohm
Output resistance	350-353 ohm
Insulation resistance	>= 2000 Mohm
Creep (30 Minutes)	0,03 % F.S.
Thermal compensation	-10 / +40°C (14 / +104°F)
Operating temperature	-20 / +70°C (-4° / +158°F)
Temperature deviation zero	0,003 % F.S. / °C
Temperature deviation full scale	0,002 % F.S. / °C
Protection class	IP 67
Standard cable length	5 m – 4 x 0,25 (shield not connected to the load cell body)

For complete and up-to-date technical specifications please refer to the datasheet you can download here

Type	SHIELDED CABLE 4C R5 PUR 4X0,25
Length	5 m (shield not connected to the cell body)
Red	+ IN
Black	- IN
Green	+ OUT
White	- OUT

General guidelines for installing and mounting load cells:

Respect the direction in which forces are applied to the load cells
Do not exceed the temperature limits shown on the rating plate
Do not remove the labels from the cells
Protect cables properly with sheaths or cable ducts
Connect each cell to earth with a suitable cable, bridging the plates of the mounting accessories if necessary
Do not weld on the mechanical structure once the cells are in place
Avoid or minimise mechanical constraints between the fixed structure and the weighed structure, to prevent weighing errors and zero return problems
When vibrations or dynamic loads are present, protect the cells with anti-vibration mounts
Protect the cells from dust build-up with suitable covers