Indicator WIN66


Download PDF

Gicam weight indicators are weight indicator devices connected to load cells. We have multifunction displayers for weighing and dosing, for bridge weighing, with load limiter. Portable displayers are available in comfortable briefcases. We have panel mounting, portable, DIN and OMEGA bar mounts, analog indicators and touch screens indicators. IP65 products are available with dust protection. Gicam indicators support industrial communication protocols like PROFIBUS, PROFINET, MODBUS and more.

LOAD LIMITER for load cells


Zoom Click to enlarge image

Indicator WIN66

Technical Specifications

Power supply10 - 30 VDC, protected against polarity inversion. Protection with resettable fuse
Max power consumption6 W
Operating temperature-10 / +50 C (14 / 122 F) Humidity Maximum 85% non-condensing
Display4-digit numeric red LED with 7 segments (h 7 mm)
Keyboard4 mechanic keys
Linearity< 0.01% of full scale
Internal resolution24 bit
Weight resolutionUp to 10,000 divisions of load
Measuring rangeFrom -3.9 mV/V to +3.9 mV/V
Zero / FS CalibrationAutomatic (theoretical) or executable through buttons
Logical output alarm4 relay outputs (24 V DC one changeover contact), Power supply contacts and board must be the same
Serial port2 RS232 programming module
 Max. cable length15 m
 Serial protocolsCANOpen port (optional) Data transmission and card programming
Conforms to standardsCompliance to EMC norms: EN61000-6-2, EN61000-6-3, Compliance electric safety: EN 61010-1, EN13849-1
For the complete and latest technical specifications, please refer to the technical data sheet which can be downloaded here:
Download PDF
 
Connections  Indicator WIN66

MOUNTING OF THE LOAD CELL

General precautions to be followed in the installation and assembly of load cells:

  • Follow the direction of application of force on the load cell
  • Do not exceed the limits of the temperature as indicated in the data sheet
  • Do not remove labels from the load cell
  • Adequately protect the cables with sleeves or channels
  • Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
  • Do not carry out any welding on the mechanical structure after mounting the load cell
  • Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
  • In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
  • Protect load cell from any dust accumulation with any appropriate means