Cookie Consent by Free Privacy Policy website

Off-center load cell TA7


Download PDF

Off-center load cell for weighing systems, automatic dosage machines, medical, food, textile, and automation in general

Off-center load cell

Upon request with certification ATEX or IECEx.

Omologated C3 OIML.


Zoom Click to enlarge image

Off-center load cell TA7 Off-center load cell TA7 Schema
ATEX IECEX OIML

Technical Specifications

MaterialSteel
Nominal load50, 75, 100, 150, 200 kg
Limit load150 % F.S.
Breaking load300 % F.S.
Supply voltageVcc 15 Max
Output2 mV/V
Output tollerance0,1 % F.S.
Zero tollerance1 % F.S.
Linearity0,03 % F.S.
Hysteresis0,03 % F.S.
Reapeatability0,03 % F.S.
Input resistance380-386 ohm
Output resistance350-353 ohm
Insulation resistance>= 2000 Mohm
Creep (30 Minutes)0,03 % F.S.
Thermal compensation-10 / +40C (14 / +104F)
Operating temperature-20 / +70C (-4 / +158F)
Temperature deviation zero0,003 % F.S. / C
Temperature deviation full scale0,002 % F.S. / C
Protection classIP 66
Standard cable length5 m 6 x 0,30 (shield not connected to the load cell body)
For the complete and latest technical specifications, please refer to the technical data sheet which can be downloaded here:
Download PDF

Connections

TypeSHIELDED CABLE 6C R6 PVC 6X0,30
Length5 m (body lead cell not connected shield)
Red+ IN
Black- IN
Yellow+ REF
Blue- REF
Green+ OUT
White- OUT
Connections  Off-center load cell TA7

MOUNTING OF THE LOAD CELL

General precautions to be followed in the installation and assembly of load cells:

  • Follow the direction of application of force on the load cell
  • Do not exceed the limits of the temperature as indicated in the data sheet
  • Do not remove labels from the load cell
  • Adequately protect the cables with sleeves or channels
  • Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
  • Do not carry out any welding on the mechanical structure after mounting the load cell
  • Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
  • In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
  • Protect load cell from any dust accumulation with any appropriate means