Double shear load cell DT2

Name: Double shear load cell DT2
Brand: Gicam

Double shear load cells for balances and scales, tension measure etc.

Double shear load cell

Upon request with ATEX or IECEx certification

Click on the image to enlarge

Technical specifications

Material	Steel
Nominal load	20, 40, 50, 60 ,75, 100, 125, 150, 200 klb
Limit load	150 % F.S.
Breaking load	300 % F.S.
Supply voltage	Maximum 15 V dc
Output	2 mV/V
Output tollerance	0,1 % F.S.
Zero tollerance	1 % F.S.
Linearity	0,03 % F.S.
Hysteresis	0,03 % F.S.
Reapeatability	0,03 % F.S.
Input resistance	700-710 ohm
Output resistance	700-705 ohm
Insulation resistance	>= 5000 Mohm
Creep (30 Minutes)	0,1 % F.S.
Thermal compensation	-10 / +40°C (14 / +104°F)
Operating temperature	-20 / +70°C (-4 / +158°F)
Temperature deviation zero	0,003 % F.S. / °C
Temperature deviation full scale	0,002 % F.S. / °C
Protection class	IP 67
Standard cable length	9 m – 4 x 0,25 (shield not connected to the load cell body)

For complete and up-to-date technical specifications please refer to the datasheet you can download here

Type	SHIELDED CABLE 4C R5 PUR 4X0,25
Length	5 m (shield not connected to the cell body)
Red	+ IN
Black	- IN
Green	+ OUT
White	- OUT

General guidelines for installing and mounting load cells:

Respect the direction in which forces are applied to the load cells
Do not exceed the temperature limits shown on the rating plate
Do not remove the labels from the cells
Protect cables properly with sheaths or cable ducts
Connect each cell to earth with a suitable cable, bridging the plates of the mounting accessories if necessary
Do not weld on the mechanical structure once the cells are in place
Avoid or minimise mechanical constraints between the fixed structure and the weighed structure, to prevent weighing errors and zero return problems
When vibrations or dynamic loads are present, protect the cells with anti-vibration mounts
Protect the cells from dust build-up with suitable covers